Issued on 30 May 2013

Name

Download

Guidance for the Classification and Registry of Ships

Notice No.27

Rules for Approval of Manufacturers and Service Suppliers

Rule No.37

Rules/Guidance for the Survey and Construction of Steel Ships Part B

Rule No.38 / Notice No.28

Rules/Guidance for the Survey and Construction of Steel Ships Part C

Rule No.38 / Notice No.28

Rules for the Survey and Construction of Steel Ships Part CSR-B

Rule No.38

Rules/Guidance for the Survey and Construction of Steel Ships Part CS

Rule No.38 / Notice No.28

Guidance for the Survey and Construction of Steel Ships Part D

Notice No.28

Rules/Guidance for the Survey and Construction of Steel Ships Part H

Rule No.38 / Notice No.28

Rules/Guidance for the Survey and Construction of Steel Ships Part K

Rule No.38 / Notice No.28

Rules/Guidance for the Survey and Construction of Steel Ships Part L

Rule No.38 / Notice No.28

Rules/Guidance for the Survey and Construction of Steel Ships Part P

Rule No.38 / Notice No.28

Rules for the Survey and Construction of Steel Ships Part Q

Rule No.38

Rules/Guidance for the Survey and Construction of Steel Ships Part R

Rule No.38 / Notice No.28

Rules/Guidance for Marine Pollution Prevention Systems

Rule No.39 / Notice No.29

Guidance for Safety Equipment

Notice No.30

Guidance for High Speed Craft

Notice No.31

Rules/Guidance for the Survey and Construction of Passenger Ships

Rule No.40 / Notice No.32

Guidance for the Approval and Type Approval of Materials and Equipment for Marine Use

Notice No.33

Summary of Amendments to the Rules and Guidance

Name

Approval of Firms Carrying Out In-Water Survey of Ships

Maintenance, Testing and Inspection of Fire Protection Systems and Appliances

Changes to Classification Survey, etc. Application Forms

Application of NOx Emission Requirements when Replacing Diesel Engines

IACS CSR for Bulk Carriers, July 2012 Corrigenda 1 and 2

Supporting Structures of Independent Prismatic Tanks

Incorporation of Material Factors for High Tensile Steel into the Formulae for Calculating the Scantlings of Frames below Freeboard Deck forward of Collision Bulkhead

Stability Computer for Passenger Ships

Pontoon Barges

Submission of Plans and Documents for Classification Surveys During Construction

Scope of Application of Fire-resistant Cables

Ambient Conditions for Electrical Installations

Ventilators installed in Tanker Cargo Pump Rooms

Fixed Water-based Fire-fighting Systems for Vehicle Spaces and Ro-Ro Spaces

Load Bearing Structures of High Speed Craft on Fire

Discharge Locations of Enriched Gas Generated from Nitrogen Generators

Secondary Means of Venting Arrangements for Tankers

Installation of Fixed Fire Detection and Fire Alarm Systems

Specification of Fixed Foam Fire-extinguishing Systems and Automatic Sprinklers

Grace Period for Compliance with the 2010 FTP Code

Interpretation of “Safe Return to Port” for Passenger Ships

Fire-extinguishing Systems for Deep-fat Cooking Equipment

Devices in Pantries

Helicopter Facility Foam Fire-fighting Appliances

Fuel Pump Arrangements when Operating in Emission Control Areas (ECA)

Interpretations Concerning Lifeboat Exterior Colours

Screened Angle of the All-round Lights

Omission of Approval Tests for Manufacturing Processes

Approval of the Manufacturing Process of Offshore Mooring Chains

Chemical Composition of Propeller Castings

Ultrasonic Tests of Steel Forgings

Test Certificates for Anchors and Chains

The word “omitted” when used in the context of the rule amendments described in the Amendments means that the requirement in question was not amended and is still applicable as before; it does not mean that the requirement is no longer applicable or was deleted.